How To Unbrick Poco M5s Jun 2026

This means the Auth Bypass tool failed or disconnected. Unplug the phone, restart the MTK Auth Bypass tool, perform the volume button combination again, and verify the tool confirms secure boot is disabled before hitting download in SP Flash Tool.

EDL mode is a last-resort, low-level protocol used to flash firmware when the phone's main software is completely corrupted. It is often the only way to fix a hard brick.

To unbrick your POCO M5s, you must first determine if it is a (can still access Fastboot or Recovery mode) or a Hard Brick (phone is completely dead/black screen and only detected as a MediaTek port on a PC).

Turn off your device completely. If it is bootlooping, hold the button until the screen goes black. Press and hold the Volume Up + Power buttons together. how to unbrick poco m5s

If you have followed this entire guide—installed drivers, loaded the correct rosemary scatter file, used the MTK bypass tool, and still see no life—your Poco M5s likely has a (dead eMMC chip, cracked motherboard, or water damage).

Your phone shows signs of life. It might be stuck on the Poco/Mi logo, constantly restarting (bootloop), or booting straight into Recovery Mode. This happens due to minor software corruption, a bad OTA update, or incompatible root modules.

Click the button (green arrow icon) at the top of SP Flash Tool. This means the Auth Bypass tool failed or disconnected

A: No. This is a soft brick. Boot into recovery, wipe data, and reflash the ROM using Mi Flash Tool or SP Flash Tool.

Go to Settings → Recovery → Advanced Startup → Restart now → Troubleshoot → Advanced options → Startup Settings → Restart → Press 7 (Disable driver signature enforcement).

(codename: / rosemary_p ) is trapped in a constant bootloop, stuck on the POCO logo, displaying a "dm-verity corruption" error [1.11], or completely unresponsive, your device is bricked. Because the It is often the only way to fix a hard brick

If you accidentally used in SP Flash Tool, you erased your unique IMEI numbers. To restore:

Install the LibUSB Win32 application on your PC. Connect your powered-off, bricked Poco M5s to the computer while holding both volume buttons. In the LibUSB utility, quickly select and install a filter for the when it briefly appears in the device list. 2. Bypass Authentication

Turn off your Poco M5s. Press and hold the and Volume Down Button together until you see the Fastboot logo (the Mi bunny character or the text "FASTBOOT"). Connect the phone to your PC via USB. 3. Configure Mi Flash Tool