Check that the cutting tool is correctly installed and balanced.
Always wear snug-fitting safety goggles or a full face shield.
50:1 using Stihl two-stroke air-cooled engine oil (or 25:1 with standard high-quality TC-rated two-stroke oils if specified on older legacy units). Spark Plug: Bosch WSR 6F or NGK BPMR7A Spark Plug Gap: 0.5 mm (0.020 inches) Ignition System: Electronic magneto ignition Safety Precautions and Protective Gear stihl fs96 manual
Note: Standard factory settings are typically 1 full turn open from the gently seated closed position for both the H and L screws.
Remove and inspect the electrode color. A healthy engine yields a light tan or gray color. Clean carbon deposits with a wire brush or replace the plug entirely. Check that the cutting tool is correctly installed
Keep your Stihl FS 96 running for decades by adhering to a strict inspection routine. Before Each Use Check for loose nuts, screws, and fasteners. Inspect the fuel system for visible leaks.
: You can email Stihl customer service if the digital version is temporarily unavailable online. 🛠️ Key Maintenance Specifications Spark Plug: Bosch WSR 6F or NGK BPMR7A Spark Plug Gap: 0
Never operate the machine without the deflector (J) in place.
Basic setting (turn screws gently until seated, then back out):