Ipm17-002 - Motherboard Manual

Power LED (Chassis Power Indicator Light) Pins 5 (+) & 7 (-): Power Switch (Power On/Off Button) Pins 6 (+) & 8 (-): Reset Switch (Chassis Reset Button) Pin 9: Empty / Key space Pin 10: Ground or Not Connected

Pins 5 & 7: Reset Switch (RST_SW) — Orientation does not matter. Pin 9: Dummy pin (No connection) 6. Clearing the BIOS (CMOS Reset)

1 × RJ-45 LAN port featuring link/activity status LEDs.

There is often a dedicated "PASS_CLR" jumper to erase the BIOS administrator password using a similar process to the CMOS clear. The Retro Web of the board layout or specific BIOS update instructions? How to connect front panel connectors to the motherboard 2 Nov 2012 — ipm17-002 motherboard manual

Search for the PC brand and model (e.g., “HP Compaq 8300”) rather than “ipm17-002” to find the relevant manual and teardown reviews.

Use a small flat-head screwdriver or fingernail to release the retaining clip on the .

The is a widely used OEM component manufactured by Pegatron . It is most commonly found inside pre-built desktop computers from major brands like HP and Acer. Because it was originally distributed as part of complete systems, finding a standalone official manual can be challenging. Power LED (Chassis Power Indicator Light) Pins 5

I was unable to find an official manual or detailed review specifically for a motherboard labeled through standard search queries.

Hard Drive LED [+] [1] [2] [+] Power LED Hard Drive LED [-] [3] [4] [-] Power LED Reset Switch [5] [6] [+] Power Switch Reset Switch [7] [8] [-] Power Switch (Empty) [9] [10] [Key Pin - No Pin]

Integrated graphics depend on the installed processor (e.g., Intel HD Graphics 530/510). There is often a dedicated "PASS_CLR" jumper to

Keep the following restrictions in mind before buying upgrade components for an IPM17-002 system:

This typically indicates a memory error. Remove the RAM, clean the contacts with isopropyl alcohol, and reinstall a single stick to test.