: The foot-pedal assisted lid allows for easy, hands-free opening, while the vertical design maintains a high capacity in a compact footprint.
: 105°C to 135°C for sterilization; 45°C to 104°C for heating; 45°C to 95°C for warming. Max Operating Pressure : 0.25 MPa (approx. 36 psi). Power Requirements : AC 220–240 V, 15A. Dimensions : 18.5" (W) x 20.8" (D) x 39.5" (H); Weight: 159 lbs. sterilizers.com Top Performance Features autoclave - sx-300 sx-500 sx-700 - OUS-research.no
Often caused by a misaligned lid or a dirty gasket.
Allows users to save and reuse custom parameters. autoclave tomy sx700 manual best
is critical for safe and effective operation. Below are the key steps to operating the device based on manufacturer guidance. 1. Pre-Operation Setup
| Frequency | Action | Instructions | | :--- | :--- | :--- | | | Check water level | Refill reservoir with distilled water. | | Weekly | Clean the door gasket | Wipe with a soft, damp cloth; check for cracks. | | Monthly | Clean the strainer | Remove and clean the water intake filter inside the chamber. | | Every 50 cycles | Descaling | Run a "Clean" cycle with Tomy descaling agent (or citric acid). | | Every 6 months | Replace air filter | Located behind the front panel. |
Check the water level in the exhaust bottle and discard excess condensate. Weekly Maintenance : The foot-pedal assisted lid allows for easy,
Remove the heater cover and scrub any minor scale accumulation off the heating element using a non-abrasive pad. Monthly/Quarterly Maintenance
Remove the basket and drain the water. Clean the interior with a mild detergent.
TOMY SX-700 is a top-loading, high-performance autoclave designed for laboratory sterilization with a 79-liter capacity. It is widely recognized for its space-saving footprint and advanced safety features, such as the foot-pedal operated lid and dual-fan cooling system. TOMY Lab Equipment Essential Operations & Manual Highlights The official TOMY SX-Series Operation Manual 36 psi)
Monitor the unit during the initial heating phase to ensure the pressure rises naturally alongside the temperature. Step 5: Unloading Wait for the cycle to finish. An audible alarm will sound.
Never place volatile chemicals, flammable solvents, corrosive acids, or radioactive materials inside the autoclave.
The lid uses a unique mechanical assist system, allowing it to be opened and closed easily with one hand. A foot pedal is used to release the lid lock securely.