: Tap to skip tracks or change frequencies. Hold to adjust independent hardware volume.
: Connect your computer or legacy media player to the 3.5mm jack using the included audio wire to pass high-quality analog sound directly to the dual 3W drivers. 4. Managing Hands-Free Calls When linked to an active smartphone over Bluetooth: Answer Incoming Call : Short-press the Play Button (2) .
The buttons are arranged on the top panel for tactile navigation, while the rear houses the connectivity interfaces.
Use the or - buttons to turn the selected alarm ON or OFF . Using the Snooze Function
Long press button (3) for the previous track or (4) for the next track. Lamp Control baseus encok e09 manual
Baseus Encok E09 Manual: Setup, Features, and Troubleshooting
The device allows you to set two entirely distinct alarms, perfect for staggered morning schedules.
Short press the once more to save and finalize the time. 3. Setting the Dual Alarms
Use the and Volume - buttons to adjust the correct minutes. : Tap to skip tracks or change frequencies
1500 mAh battery capacity; requires approximately 4 hours for a full charge. Operating Time:
He spent three days digging through the "Paper Archives" of the ruins of a suburban library. Finally, wedged between a soggy cookbook and a vintage car magazine, he found it: a small, accordion-folded slip of paper titled .
Press the or Volume+ buttons to adjust the correct hour.
The Baseus Encok E09 does not support the Baseus App (which is reserved for higher-end models like Bowie series). All controls are hardware-based via the touch panel. No EQ, no firmware updates, no battery percentage widget (Android/iOS shows generic level). Use the or - buttons to turn the selected alarm ON or OFF
Short press button (3) to decrease or button (4) to increase volume. Skip Track
Plug the included Micro USB cable into the port on the back of the device. Connect to a wall adapter or USB power source. A full charge takes approximately 4 hours. The indicator light will show charging status. 5. Troubleshooting and FAQ Ensure the battery is charged.
Accept the pairing confirmation prompt. Once linked successfully, media sound profiles will route through the speaker. TF Card and Auxiliary Playback