Stock ROM, select the Android_scatter.txt file, and click .
The tool should recognize the device, and a progress bar will appear. It will turn from gray to yellow or green as the firmware is written to the device.
Verify that the dropdown menu directly above the partition checklist is set exclusively to . Do not choose Format All + Download as this can erase your unique device IMEI network serial numbers.
: Check that the scatter file matches the precise L4020 model variant . Try changing the target USB data cable or running SP Flash Tool with administrator permissions. Issue 3: Device Stays Stuck on the Wiko Logo official wiko kite 4g l4020 stock rom install
Download and extract the Wiko USB Driver package on your PC. Run the driver setup file ( .exe ) as an Administrator. Follow the on-screen prompts to complete the installation.
If your firmware download contains raw partition files (like boot.img , system.img ), you must use the Broadcom MultiDownloader.
Official Wiko Kite 4G (L4020) Stock ROM Installation Guide Flashing the official stock ROM on your Wiko Kite 4G (L4020) is the most effective way to resolve severe software issues. This process reinstalls the factory operating system, which fixes bootloops, clears malware, removes system errors, and unbricks dead devices. Stock ROM, select the Android_scatter
Once the flashing process is complete, reboot your device.
Remove the battery, reinsert it, and press the button.
completely. If the battery is removable, take it out, wait 5 seconds, and reinsert it. Verify that the dropdown menu directly above the
Maria disabled first (since SPD drivers are unsigned):
: Look for the "Scatter" based ROM package.
This is almost always caused by driver issues. Reinstall the MTK VCOM drivers, try a different USB port (preferably a USB 2.0 port on the back of the PC), or swap out the USB cable.
Extract the downloaded Stock ROM (Firmware) zip file on your PC. Inside, you should see a folder containing multiple files, including one specifically named as a "scatter" file (usually a text file). Set Up the Flash Tool SP Flash Tool as an administrator. Navigate to the tab and click the Scatter-loading
: Click the "Download" or "Start" button in the flashing tool. While holding the Volume Up or Volume Down button (to trigger download mode), connect the phone to your computer via USB cable.