Here are the general steps to program the Vertex VX-351:
Are you currently experiencing a like "Communication Error" while trying to read the radio?
: The official Vertex Standard cable is the CT-42 (serial connection) or FIF-10A / FIF-12 (USB interface requiring a CT-106 adapter cable).
Right-click the CE86 executable file and select . Under the Compatibility tab, check "Run this program in compatibility mode for" and select Windows 7 . Also, check the box for Run this program as an administrator . 2. COM Port Selection vertex vx351 programming software work
You cannot use a standard USB cable. You need a cable with a 4-pole 3.5mm jack (often referred to as a "Vertex/Yaesu" style cable). OEM vs. Aftermarket : Original Vertex cables (like the
With the hardware and software properly aligned, you are ready to connect the radio. Follow this precise sequence to avoid data corruption: Step-by-Step Connection Process: Ensure the VX-351 radio is completely . Plug the USB cable into your computer.
Vertex Standard CE86 (Common Editor 86) is the official software designed for the VX-350 series, which includes the VX-351 and VX-354 models. Here are the general steps to program the
Never plug the cable into the computer before installing the drivers, as Windows may assign an incorrect generic driver.
The CE86 software was written during the Windows XP and Windows 7 eras. Modern operating systems like Windows 10 and Windows 11 strictly police older software and unsigned drivers. Run in Compatibility Mode
) are most reliable, but many users successfully use generic USB-to-3.5mm cables found on Amazon or eBay. The Connection Under the Compatibility tab, check "Run this program
Channel 4. “Kitchen, this is Carol, how’s the pie?”
Open (right-click the Windows Start button and select Device Manager). Expand the Ports (COM & LPT) section.