Select the option and apply the necessary configurations (Server IP, Room ID, etc.).
Performing a full reset is a powerful step. The official support documentation confirms it is necessary in several scenarios:
In the world of meeting room hardware, the Evoko Liso is reliable—but when it fails, only a verified factory reset will bring it back from the digital dead.
, you must perform a using a bootable USB drive . This process wipes all settings, updates the firmware, and returns the device to an unconfigured state. Step 1: Create the Reset USB Drive evoko liso factory reset verified
Here’s an interesting, verified write-up on performing a factory reset on the Evoko Liso (a high-end conference room scheduling panel):
Do you manage these devices via an or a cloud setup ?
: The process is considered "verified" when the screen displays "Flash has been successfully completed!" before the final reboot. Biamp Cornerstone Step-by-Step Reset Process Prepare the Drive : Download the Liso Device Reset file from Biamp and use imaging software like to flash the file to your USB stick. Power Down Select the option and apply the necessary configurations
(If you are stating that a factory reset on the device has been confirmed.)
: Click on the Rooms tab in the top navigation menu.
Use a paperclip to press and located next to the SD slot. , you must perform a using a bootable USB drive
In the modern workplace, the Internet of Things (IoT) has transformed static office environments into dynamic, connected ecosystems. Among the myriad of devices facilitating this transition, the Evoko Liso stands out as a premier meeting room management solution. By streamlining booking processes and reducing scheduling conflicts, it has become an essential tool for operational efficiency. However, like all sophisticated digital hardware, the Evoko Liso is susceptible to software glitches, configuration errors, or the need for decommissioning. In these instances, the factory reset procedure is a critical maintenance tool. A "verified factory reset"—the confirmed successful restoration of the device to its original state—ensures that the hardware is secure, functional, and ready for redeployment or secure disposal.
Keep your eyes on the touchscreen. If the system reads the boot sector of your recovery disk cleanly, the screen terminal displays this verification statement: "If you do not want to flash the device, remove the USB image and reboot the device, otherwise it will start flash in 30 seconds."
Locate the small rubber plug on the side/back of the Liso unit covering the MicroSD slot. Remove it.
[Power Off Device] -> [Insert Reset USB] -> [Power On Device] -> [Automated Flash] -> [Unplug & Reboot] 1. Build the Bootable Recovery Media