Narco Escort Ii Installation Manual Full ((exclusive)) [2K]

: Slide the Escort II straight into its mounting tray. Using a 3/16" Allen wrench , turn the internal ramping screw clockwise until the rear mating connector engages completely. Do not overtighten or force the ramping screw, as this can crack the internal connector housing. 2. Electrical Wiring & Coaxial Connections

Use the "FLIP" momentary switch to exchange Active and Standby frequencies.

: Typically a V-shape dipole. It should be mounted away from large metal surfaces to prevent pattern "holes". narco escort ii installation manual full

Ensure the mounting rack is securely fastened to the instrument panel.

While Narco avionics have largely been superseded by modern glass cockpit technology from brands like Garmin, the Escort II remains a popular and functional piece of equipment for vintage aircraft owners, restorers, and those looking for a cost-effective radio solution. However, finding a complete and official "Narco Escort II installation manual" is a significant challenge. Narco Avionics is no longer in business, and original hard copies of these crucial documents have become valuable and scarce collector's items. : Slide the Escort II straight into its mounting tray

Use the specialized Narco locking hex-wrench tool to tighten the internal cam-lock. Do not over-tighten, as this can warp the mounting frame. 3. Wiring and Pin Assignments

The Narco Escort II is a compact, lightweight (3 lbs) "shared system" avionics unit that functions as either a 720-channel COM transceiver or a 200-channel VOR/LOC NAV receiver, though it cannot perform both functions simultaneously. Unlike traditional indicators, it utilizes a gas discharge display with a row of lights for VOR/LOC deviation instead of delicate meter movements. It should be mounted away from large metal

Before beginning installation, ensure you have the full documentation, including installation drawings and wiring schematics.

Note: Always verify your specific unit's Mod level against the wiring diagram on the chassis sticker, as Narco made slight variations during production. 4. Antenna Connections

A "V" or "T" style dipole antenna. If you are sharing this antenna with another NAV radio, you must use a signal splitter (diplexer) to avoid signal loss. 5. Post-Installation Testing Once wired, perform the following checks: