Nokia G-010g-r Manual [verified] ❲Certified❳
If your ONT lights look perfectly normal (solid green on PON and PWR), but you cannot get online, the issue is likely with your personal Wi-Fi router.
One 10/100/1000Mbps Gigabit Ethernet port to connect a Wi-Fi router or computer. Power Port: Connects to the provided 12V DC power adapter.
Integrated "dying gasp" support to alert the service provider instantly during a power outage.
The G-010G-R is designed to provide Gigabit-speed broadband services. It features a single Gigabit Ethernet port to connect a router or computer, ensuring high-speed data delivery. Technical Specifications Nokia ONT G-010G-R Technology: GPON (ITU-T G.984) Port: 1 x 10/100/1000 Mbps RJ-45 LAN Port Fiber Connector: SC/APC Application: Fiber-to-the-Home (FTTH) 2. Unboxing and Physical Installation Proper installation is crucial for optimal signal strength. What’s in the Box Nokia G-010G-R ONT Power Adapter Ethernet Cable Quick Installation Guide Installation Steps
The front panel of the Nokia G-010G-R features LED lights that indicate the status of your connection. Understanding these lights is your first step in troubleshooting. Solid Green: Power is on and normal. Off: Device is off or has no power. PON (Passive Optical Network): nokia g-010g-r manual
Wait 2 to 3 minutes for the device to complete its boot cycle. Understanding the LED Status Lights
The ONT is not receiving a laser light signal from the fiber optic line.
Upon powering on, the lights will cycle. Wait 2–3 minutes.
light is red, ensure the fiber cable is clicked securely into place. Avoid sharp bends in the fiber wire. Slow Speeds : Ensure you are using at least a Ethernet cable. Older Cat5 cables are limited to 100 Mbps. : To restore factory defaults, press and hold the recessed button for 10 seconds using a paperclip. configure a specific VLAN or bypass your ISP's router using this ONT? If your ONT lights look perfectly normal (solid
Try a different Ethernet cable between the ONT and the router. How to Factory Reset
A: Check the sticker on the base of the unit. If none exists, try user / user , admin / admin , or admin /[blank]. Most US ISPs disable password access.
The Nokia ONT G-010G-R is a compact indoor unit designed for Fiber-to-the-Home (FTTH) environments, converting fiber optic signals into a Gigabit Ethernet connection. It utilizes a 12V DC power supply and supports high-speed data transmission for internet connectivity, managed via a standard GPON SC/APC interface. For more details, visit Nokia . Nokia ONT G-010G-R Quick Reference Guide
A 10/100/1000Base-T Gigabit Ethernet port (RJ-45) used to connect the ONT to your Wi-Fi router or PC. Power Port: For the 12V DC power adapter. Integrated "dying gasp" support to alert the service
Open a web browser and type the default IP address: or 192.168.1.1 (varies by firmware version). Enter the default credentials when prompted: Username: ADMIN or admin
If you forget your modified administration password or experience corrupted settings, perform a hardware reset. Locate the pinhole labeled on the device housing. Insert a straightened paperclip or pin into the hole.
power adapter to the port on the ONT and plug the other end into a wall socket. Power On: Press the ON/OFF button to turn the device on. Understanding the LED Indicator Lights
The Nokia Optical Network Terminal (ONT) G-010G-R is the answer for home networking delivered by Gigabit Passive Optical Network ( Nokia ONT G-010G-R Quick Reference Guide