Skope Heated Towel Rail Timer Instructions !!better!! [Web]

If you are programming the unit for the first time or clearing an old schedule, locate the small button (often a recessed pinhole). Use a paperclip or pen tip to press it. This clears the memory and prepares the system for fresh inputs. Step 2: Set the Current Clock and Day

If you have completely confused the programming or bought a used home, reset the timer.

The towel rail strictly follows the custom schedules you just programmed.

Your Skope timer allows up to 8 ON/OFF events per day. For a typical bathroom, you only need 2 events: and Evening .

Press the dedicated button repeatedly to choose a fixed runtime (typically 30 minutes, 1 hour, or 2 hours). skope heated towel rail timer instructions

Press the CLOCK button or wait 15 seconds for the screen to return to the main display. Switching Between Auto and Manual Modes

Most Skope rails use a with an LCD screen.

Before you can program a schedule, the unit needs to know the actual time.

She pressed 'On'. Then she had to set the time. She keyed in 06:00. That gave it thirty minutes to heat up before she stepped out of the shower. If you are programming the unit for the

What are you currently experiencing? Share public link

Verify that the main isolation switch for your bathroom towel rail is turned on.

Even with perfect instructions, things go wrong. Here is how to fix the most frequent complaints.

To turn the unit off before the countdown ends, cycle through the time increments past the maximum setting until all LED lights turn off, or press and hold the power button for 3 seconds. Recommended Heating Schedules for Efficiency Step 2: Set the Current Clock and Day

Press and MIN to input your desired start time (e.g., 6:30 AM). Press PROG again. The screen will change to 1 OFF .

remain in the "ON" position so the external timer can control the power flow. Digital Wall Timer (External)

Use the + / - (or Up/Down) buttons to select the current day (MTWTFSS).

Before programming, identify your specific controller type. Most Skope setups feature either: