Samyung Srg-1150dn Installation Manual [upd] Jun 2026

Attach the external SPR-8630 keyboard and your dedicated system data printer (e.g., DPU-414 or OKI data printer) to the serial/parallel communication ports on the back of the NBDP unit.

The Samyung SRG-1150DN is a GMDSS-compliant MF/HF radio designed for maritime communication, requiring 24V DC power and offering built-in DSC functionality. Installation requires proper connection of TX/RX antennas, inputting the vessel’s MMSI ID, and ensuring a minimum 142 cm safety distance from the antenna. Detailed installation guidance and technical specifications are available in the FCC Report FCC Report INSTRUCTION MANUAL - FCC Report

The is a high-performance MF/HF radio transceiver designed to meet the rigorous safety and communication requirements of the Global Maritime Distress and Safety System (GMDSS). This guide provides a comprehensive overview for professional installers and maritime operators on the proper setup, wiring, and initial configuration of the unit. 1. Pre-Installation Specifications samyung srg-1150dn installation manual

: Maintain a minimum distance of 2.4m from standard compasses and 1.5m from steering compasses to prevent magnetic interference. 2. Physical Mounting

This is where you configure the radio’s settings before using it for communication. Attach the external SPR-8630 keyboard and your dedicated

Before starting, gather the following items and verify the contents of your shipment.

The SRG-1150DN is a versatile device that supports various communication modes. inputting the vessel’s MMSI ID

Check battery health. Tighten terminals and verify that power cable gauges match the 40A peak requirements. Wiring polarity mismatch or incorrect baud rate.

Run thick gauge marine-grade copper wire from the 24V emergency batteries to the rear DC terminals. Ensure correct polarity to prevent blowing the internal power board protection fuses.

Optional components include the and SD-250 alarm box . System Verification :