Because MPALL communicates with hardware at a low level, your operating system and security software might interfere with the process.
The manufacturer of the silicon controller chips found inside millions of USB drives from brands like Kingston, Toshiba, Corsair, and Verbatim.
After saving your configuration, return to the main menu. The software should detect your USB drive. Click the "Start" button to begin the process. This can take several minutes, and you must not interrupt it or disconnect the drive until completion. Once finished, close the tool, safely remove the USB drive, and reinsert it to allow the operating system to recognize it. phison mpall v3720b ps2251 flashboot repack
Look for the line. It should say something like Phison PS2251-XX (e.g., PS2251-67). Note the Flash ID (FID) and the ISP Version . Phase 2: Preparing the MPALL Repack
By modifying MP.INI to include [MISC] → IDBLK_LIBRARY_VERSION=0x0001 and setting FC1=0xFF , the repack can change your USB’s to “Fixed Disk.” This allows: Because MPALL communicates with hardware at a low
The is a community-modified or bundled version of this official tool. It integrates essential configuration files ( .ini ), updated controller drivers, and a verified library of firmware files ( .BIN ) needed to revive bricks. The term "FlashBoot" signifies its optimization for restoring USB drives to a bootable, clean state. Step 1: Verify Your Controller with ChipGenius
You plug in your drive. Windows detects it, but shows . This is a classic firmware handshake failure. The OS cannot communicate with the NAND chip. MPALL v3.72.0B can force a firmware reload, reviving the drive. The software should detect your USB drive
Before starting, back up all important data, as this process will completely erase all information on the target USB drive.
Warning: The burner file ( BN ) initializes the RAM on the controller, while the firmware file ( FW ) writes the permanent code. Mixing these up or using the wrong version will soft-brick the drive. Step 4: The Flashing Process Open .
Browse to repack folder; select the FWxxVxxxx.BIN matching your IC Click to update the configuration file. Step 4: The Flashing Process
Before using the tool, the user must verify the controller model. Tools like or Flash Drive Information Extractor are used to query the USB device.
