1911a1 Markings Work | Remington Rand

: Standardized block letters, which remained until the end of production. Slide Markings (Top and Internal)

The lettering size increased, resulting in a slightly wider stamp. Serial Range: Roughly 1,015,000 to 1,042,000. Type 3 (Late 1943 to 1945) Text: "REMINGTON RAND INC. / SYRACUSE, N.Y. U.S.A."

Located forward of the serial number, it reads M 1911 A1 U.S. ARMY .

Barrel features HS or S markings on the lug, rather than a commercial contract stamp. If you are evaluating a specific pistol, tell me: remington rand 1911a1 markings

To help me tailor more information about your specific firearm, tell me:

: Letters like "G" or "O" are occasionally found stamped on the top flat portion of the frame near the disconnector hole, signifying government acceptance handling steps. Arsenal Rebuilding Markings

Format: (early) or 1,234,567 (later)

He set the pistol on the table and lifted the slide slowly. The extractor snapped like a memory catching into place. Inside the barrel, faint rifling turns were visible, the spiraled reminder that every bullet had been guided on its way by a precise cut someone long ago finished by hand and machine. On the mainspring housing, a small worn spot showed where a holster had rested; its leather had softened the metal to a dull pewter.

: A single letter "P" is stamped near the magazine release, indicating successful proof firing. A matching "P" is typically stamped on the top of the slide, just ahead of the rear sight. Barrel Markings

Remington Rand pistols fall into distinct serial number blocks assigned by the Ordnance Department: Block 1: 916,405 to 1,041,404 (Early 1942 to mid-1943) Block 2: 1,279,699 to 1,471,430 (Mid-1943 to early 1944) Block 3: 1,743,847 to 1,816,481 (1944) Block 4: 1,917,482 to 2,244,754 (1944 to 1945) Block 5: 2,380,014 to 2,616,594 (1945) United States Property and Army Markings : Standardized block letters, which remained until the

Checkered on earlier models; transitioning to grooved/serrated in later 1944-1945 production. 6. Rebuild and Arsenal Markings

: The initials of Frank J. Atwood, the Rochester Ordnance District inspector. This stamp is always located near the magazine release.

Below that, the model designation:

Remington Rand produced pistols across several serial number blocks. Correct markings often vary based on these ranges: (1943) 1,279,674 - 1,441,430 (1943–1944) 1,471,431 - 1,609,528 (1944) 1,743,847 - 1,816,641 (1944) 1,890,504 - 2,075,103 (1944) 2,134,404 - 2,244,803 (1945) 2,380,014 - 2,619,013 (1945)

. Because production evolved rapidly, markings are categorized into three primary "types" based on slide logos and frame details. 1. Primary Slide Markings