Push the filament in until the motor catches it and you see plastic extruding smoothly from the nozzle. Unloading Filament Navigate to > Unload . Select your desired extruder and wait for it to heat up.
When printing with dual extruders, always check the boxes for a Prime Tower or Ooze Shield . This catches any leaking filament from the inactive nozzle before it tracks across your model.
Before assembling the printer, inspect the package to ensure all components are intact. Technical Specifications 230 x 150 x 150 mm Extruder Type: Dual Extruder (Direct Drive) Filament Diameter: 1.75 mm Layer Resolution: 100 - 500 microns Max Nozzle Temperature: 250°C Max Bed Temperature: 120°C Connectivity: Wi-Fi, USB Flash Drive, Ethernet Package Contents QIDI Tech X-Pro 3D Printer Dual Extruder Assembly Acrylic Cover and Side Panels Toolbox (Allen wrenches, spare parts, fuses) 1x Roll of PLA filament
Tighten or loosen the plastic thumb nut under that specific corner until you feel a slight friction/resistance when tugging the paper.
Getting the X‑Pro up and running takes about 30 minutes. Follow these steps carefully: qidi x-pro manual
The company promises a reply within 12 hours; if they fail to do so, they will send two free nozzles and two build‑plate stickers as compensation.
If you hear a clicking sound and filament is not advancing:
The QIDI X-Pro includes proprietary slicing software, , based on the Cura engine. It also supports third-party slicers like Simplify3D and Ultimaker Cura. Setting Up QIDI Print
Solution:
Increase print temperature by 5–10°C, clear potential nozzle clogs, or slow down your print speed.
The documentation for maintenance (e.g., belt tensioning or nozzle replacement) is robust, often supplemented by manufacturer-provided tutorial videos for common fixes. Pros & Cons Summary
"The QIDI X-Pro utilizes a sensor for automatic leveling compensation. However, you must set the Z-Offset.
Adjust the plastic wing nut directly under that corner until you feel a slight friction/resistance when pulling the paper. Push the filament in until the motor catches
Before assembling your printer, verify that you have received all components and understand the hardware capabilities. Technical Specifications 230 x 150 x 150 mm Extruder Type: Dual Extruder (Direct Drive) Nozzle Diameter: 0.4 mm Max Nozzle Temperature: 250°C Max Bed Temperature: 120°C Connectivity: Wi-Fi, Ethernet, USB Flash Drive Supported Materials: PLA, ABS, PETG, TPU, PVA Package Contents QIDI X-Pro 3D Printer Dual Extruder Assembly Removable Curved Metal Plate Acrylic Covers (Top and Front) Two Spool Holders Toolbox (Hex keys, leveling paper, spare parts, USB drive) Power Cable 2. Hardware Assembly and Installation
Secure it using the provided screws from the bottom or back (depending on the exact hardware revision).
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.