Port For Modem Handshake - It Cannot Find The Meta Usb Com

Click on your computer name, then select > Add legacy hardware . Select Install from a list... > Show All Devices .

Understanding the root cause is the first step to a permanent solution. The issue usually falls into one of three main categories:

When a powered-off MTK device is connected to a computer, it briefly boots into a temporary state controlled by the MediaTek Preloader . it cannot find the meta usb com port for modem handshake

Quickly select the MediaTek device when it appears in the list and click .

Bad cables or USB 3.0/3.2 compatibility issues with older MediaTek chipsets. Click on your computer name, then select >

Different devices require different keys to trigger META mode. Try these variations when plugging in the USB cable to a powered-off device: No buttons held down (standard). Hold Volume Down only. Hold Volume Up only. Hold both Volume keys simultaneously. Step 5: Configure the Software Settings

Download and open or a similar utility. Download and install LibUSB-Win32 . Launch LibUSB and select Filter Wizard . Click Next , then plug in your powered-off device. Understanding the root cause is the first step

: On Windows 10 or 11, the necessary MediaTek USB VCOM (Virtual COM Port) drivers might be missing, outdated, or incompatible. A key Windows security feature—Driver Signature Enforcement—can also block the installation of these necessary drivers. Additionally, conflicts with other drivers installed by software like Huawei HiSuite can interfere.

Steps to diagnose and fix the issue:

For completely bricked MediaTek devices, you may need to ground a specific test point on the motherboard to force PreLoader mode. This is not recommended unless you have schematics and soldering skills.

or manually add "Legacy Hardware" to force the system to look for serial ports. Hardware Conflicts : Use a high-quality data cable and a USB 2.0 port