How To Read Mercedes Edc17cp57 With Ktag 7.020 Gpt Cable

KSuite (typically version 2.23 or 2.25 is paired with 7.020 hardware).

To read a Mercedes Bosch EDC17CP57 ECU using a with a GPT cable , you must use the Tricore GPT protocol. This method allows you to decrypt the ECU password and access the Flash and EEPROM data without needing to find a separate password file. 1. Preparation and Tools Device : Ktag V7.020 (Master version recommended).

ESD (Electrostatic Discharge) wrist strap. Step 1: Locating and Opening the ECU How to read Mercedes EDC17CP57 with Ktag 7.020 GPT cable

: Connect the 14P600KT02 GPT cable to the Ktag unit. This cable is essential for "bench" mode reading without desoldering the chip.

To read this Tricore unit via GPT, you must connect two distinct clusters of lines: standard power/communication lines and the dedicated GPT sensor wires. Main Connector Pinout (Using the Main Cable) : Connect the White wire to Pin 68. CAN Low : Connect the Blue wire to Pin 67. Power (+12V) : Connect Red wires to Pin 1 and Pin 5. Ground (GND) : Connect the Black wire to Pin 2. GPT Cable Connections (Sourced from Digital/Analog Ports) KSuite (typically version 2

Connect and GPT_S2 (Orange) from the specialized GPT flat ribbon cable to the precise hardware pins outlined on your K-Suite version's interface diagram. 3. Boot Pin Setup

: K-Suite (v2.23 or v2.25 is standard for this hardware version). : A stabilized 12V-13.5V power supply. Operating System : Windows XP, 7, 8, or 10. Step 1: Software Configuration Connect your KTAG unit to your PC via USB. and select the "Car" icon or navigate via "Protocols". Search for Step 1: Locating and Opening the ECU :

Connect to the CAN communication pins.

In K-Suite, click -> Infineon Tricore -> EDC17CP57 . Click on Read .

Ktag will first check the hardware connection and display the ECU hardware/software ID details. It will then authenticate the GPT security keys.

Comprehensive Guide: How to Read Mercedes EDC17CP57 Using Ktag 7.020 and GPT Cable