Lahti Precision Tpl400 Manual ✮ «ESSENTIAL»

Inspect the scale assembly for binding. Dry the enclosure; verify the shield ground connection. Load cell signal overload or broken bridge wire

: Setup for relay modules (like the LR1 set value relay unit) and digital inputs. Accessing the Manual

Ensuring accuracy across the entire range. C. Operation and Configuration

Connect the main power source to the designated terminals. Verify whether your unit is configured for AC power (typically 115/230V AC) or DC power (typically 24V DC). Always ground the chassis.

The system automates the scaling of analog outputs. lahti precision tpl400 manual

Before configuring the device, verify that your specific hardware variant matches your environmental and electronic infrastructure. Specification Details Internal Resolution 130,000 counts Measurement Speed Selectable: 10 or 80 readings per second Power Supply Options 230 VAC, 115 VAC, or 9–32 VDC (10 VA consumption) Load Cell Interface 5 VDC excitation (max 160 mA); supports up to 10 x 350 Ωcap omega load cells Analog Output Galvanically isolated 4–20 mA (max 1 k Ωcap omega ) and 0–10 VDC (max 2 mA) Relay Set Points 2 latching/inverting set point relays (240 VAC, 5A) Enclosure Rating

This is where the Lahti software shines. The manual explains:

: Utilizes Excitation (+/-) and Signal (+/-). Ensure that jumper links are manually shorted between the Excitation and Sense terminals if a 4-wire cable is used. Analogue Outputs

Assign functions to physical inputs and outputs (e.g., setpoints, batch start/stop, alarm triggers). 5. Calibration Guide Inspect the scale assembly for binding

Comprehensive Guide to the Lahti Precision TPL-400 Digital Load Cell Amplifier

High-speed, high-resolution sigma-delta converter ensuring stable readings even under vibration.

The TPL400 features software tailored for process control, including built-in setpoints for filling, discharging, and material dosing.

: Confirm the main power supply matches the unit's rating plate. Inspect the serial data cable connecting the handheld terminal to the main PCB assembly for broken pins or loose connections. Accessing the Manual Ensuring accuracy across the entire

Analog outputs can be scaled and inverted through the programming unit. Advanced Features

Cut out the panel workspace according to the exact dimensions specified in your specific TPL400 model datasheet.

utilizes a dedicated handheld interface for local configuration. Plug this unit into the specialized programming port during setup. Programming Parameters & Handheld Navigation

: Connects to most standard strain-gauge load cells (typically 4-wire or 6-wire).

: Available in plastic, die-cast aluminium, or stainless steel (IP65). Operating Temp negative 10 Technical Summary "Paper" 1. Installation & Wiring