Yamatake Sdc20 User Manual (2026)

Cut a square hole in your panel measuring exactly 45.0 mm x 45.0 mm (+0.6 mm tolerance).

Once in parameter mode, press and hold PARA for another 3 seconds.

Always refer to the table in Chapter 8 of the SDC20 manual before replacing the controller. yamatake sdc20 user manual

When connecting the SDC20 to a display (like a Pro-face HMI) or a PLC (like a Mitsubishi GOT), several manuals and resources are available. These guides detail the specific cable diagrams and communication settings, such as:

If you need to configure specific operational parameters or advanced settings for the Yamatake SDC20, tell me: Cut a square hole in your panel measuring exactly 45

The is a digital indicating controller part of the DigitroniK line, designed for temperature and process control in industrial environments. Direct Access to Manuals

Check sensor installation depth; confirm input code configuration matches the sensor type. PV input value dropped below lower limit of sensor range. When connecting the SDC20 to a display (like

Usually indicates an input error, such as a broken sensor or a wiring issue.

This manual is required for users who wish to configure and monitor the SDC20 from a personal computer. The SLP is a software package used with a dedicated communication cable to access controller data. Key features of the SLP software include:

Shows the current Set Point value or parameter settings. Key Functions

Confirm terminal screw tightness during annual maintenance shutdowns, as thermal cycling over time can cause wires to slowly loosen.