Unlike standard consumer software, MPTool requires a specific match between the tool version, the controller, and your flash memory type (TLC, MLC, etc.). You will need to source three files from reliable firmware repositories like USBDev or FlashBoot:
What (Toshiba, Sandisk, Micron, etc.) did your extraction report show?
Complete Guide to Phison PS2251-07 (PS2307) MPTool: Installation and USB Firmware Flashing
Within the configuration window, you must manually assign the Burner and Firmware files:
Comprehensive Guide to Phison PS2251-07 (PS2307) MPTool: Download, Installation, and Firmware Flashing phison ps225107ps2307 mptool install
Safely eject the USB flash drive from your operating system.
What or behavior is your USB drive currently displaying?
The process failed. An error code (e.g., 0x1102 or CT-Read Only Error ) will display. Part 5: Troubleshooting Common MPTool Errors
You will likely need a tool named similarly to or ST-Tool Rel . 3. Source the Matching Firmware Files What or behavior is your USB drive currently displaying
To install and use the Phison MPALL (Mass Production Tool) for controllers like the PS2251-07 (PS2307)
Click and do not unplug the drive until the process finishes and returns a green "OK" status.
This temporary file initiates the communication channel between your computer and the Phison controller.
Note: Ensure the burner and firmware files match your NAND memory type (e.g., MLC, TLC, or eD3). Step 2: MPTool Installation and Environment Setup Part 5: Troubleshooting Common MPTool Errors You will
Replace the Firmware Name and Burner Name paths with the exact names of the files you downloaded. Save and close the file. Section 5: Step 5 – Flashing the PS2251-07 Firmware
Browse and map the field to your downloaded FW07xxxx.BIN file.
This comprehensive technical guide will walk you through identifying your controller, downloading the correct MPTool version, installing it, and flashing the firmware to revive your dead USB drive. Part 1: Prerequisites Before You Begin