H-ig41-uatx Rev 1.1 | Manual

If you need to reset the BIOS settings or clear a forgotten password, locate the jumper labeled CLR_CMOS or JBAT1. Turn off the PC and unplug the power cable.

The socket LGA 775 supports a wide range of Intel processors, which can give this older board a significant performance boost. However, it's crucial to respect the board's power limits and BIOS compatibility.

| Feature | Details | |---------|---------| | | Micro-ATX (uATX) – 24.4 cm x 22.0 cm | | CPU Socket | LGA775 | | Supported CPUs | Intel Core 2 Quad, Core 2 Duo, Pentium Dual-Core, Celeron (FSB 1333/1066/800 MHz) | | Chipset | Northbridge: Intel G41 / Southbridge: ICH7 | | Memory | 2 x DDR3 DIMM slots (max 4GB – some BIOS updates allow 8GB unofficially) Supports DDR3-1066/800, dual-channel | | Integrated Graphics | Intel GMA X4500 (VGA output only) | | Expansion Slots | 1 x PCIe x16 (v1.1) 1 x PCIe x1 2 x PCI | | Storage | 4 x SATA 2.0 (3 Gb/s, no RAID) 1 x PATA (IDE, 40-pin) | | Audio | Realtek ALC662 (5.1 channel, 3 jacks) | | LAN | Realtek RTL8103E / RTL8111 (10/100 Mbps) | | Rear I/O | PS/2 keyboard, PS/2 mouse, VGA, 4x USB 2.0, LAN, 3x audio jacks, COM (optional) | | Power | 24-pin ATX + 4-pin CPU 12V | h-ig41-uatx rev 1.1 manual

4 GB or 8 GB (Highly dependent on BIOS version and RAM density) Memory Speed: DDR3 1066 MHz / 800 MHz Expansion Slots: 1 x PCI Express x16 (Generation 2.0) 2 x PCI Express x1 1 x PCI (Legacy)

| Connector | Label | Function | |-----------|-------|----------| | | CPU_FAN | 4-pin PWM CPU fan | | SYS_FAN | SYS_FAN | 3-pin chassis fan | | ATX_POWER | ATX_24P | Main power (24-pin) | | ATX_12V | ATX_4P | CPU power (4-pin) | | DIMM_A1/B1 | DDR3 | Memory slots | | SATA1-4 | SATA1~4 | SATA 2.0 ports | | IDE | PATA | 40-pin IDE (master/slave) | | F_PANEL | F_PANEL | Front panel switch/LED header | | USB | F_USB1/2 | Front USB 2.0 (9-pin) | | AUDIO | F_AUDIO | Front panel HD Audio/AC’97 | | CLR_CMOS | CLR_CMOS | 2-pin jumper to clear BIOS | | COM | COM | Serial port header (optional) | | SPEAKER | SPEAK | 4-pin speaker header | | CD_IN | CD_IN | Analog CD audio input (4-pin) | If you need to reset the BIOS settings

This report summarizes the H-IG41-UATX Rev 1.1 manual, highlighting scope, key features, installation and setup steps, configuration and usage guidance, maintenance and troubleshooting, safety and compliance, and recommended improvements.

2 x DDR3 DIMM slots (Dual Channel, Non-ECC, Unbuffered) However, it's crucial to respect the board's power

The H-IG41-uATX Rev 1.1 supports a variety of 65nm and 45nm Intel processors. Note that the maximum Thermal Design Power (TDP) for this board is typically 65W or 95W depending on the specific BIOS version.

The board supports a maximum of 4GB of system memory.