Bonavita Hudson Ii Lifestyle | Crib Instructions

If you are currently looking at your crib pieces or planning a nursery update, let me know:

Step 2: Connect the FootboardRepeat the process for the footboard. Align the side rails with the footboard posts, insert the hardware, and tighten. Once all four corners are connected, go back and tighten all bolts firmly.

Remove the Front Gate by unscrewing the four corner Bolt As. Keep the mattress support frame at its lowest setting. Install the Bonavita Toddler Guardrail using the medium bolts provided with the guardrail kit. 2. Daybed Conversion bonavita hudson ii lifestyle crib instructions

Ensure the spacing between the slats is no wider than 2 3/8 inches ( 3. Important Safety Guidelines

Thread the remaining long Allen bolts through the front footboard into the side panels. If you are currently looking at your crib

The primary joinery method used in the Hudson II is the cam bolt and cam lock system.

I can provide targeted troubleshooting steps or direct you to certified hardware replacement kits based on your needs. Share public link Remove the Front Gate by unscrewing the four corner Bolt As

The mattress support platform has a specific orientation. Look for a stamped warning label or an arrow indicating "This Side Up."

Wipe down the wood surfaces with a soft cloth dampened with warm water and mild soap. Avoid harsh chemical cleaners, bleach, or furniture polish, which can degrade the non-toxic finish or harm your baby.

The "Lifestyle" feature allows the crib to grow with your child. To Toddler Bed (Requires Guardrail - Sold Separately) Remove the front footboard. Ensure the mattress support is in the lowest position.