Smartpack2: Touch User Manual ((hot))

Battery symmetry faults, minor temperature variances, or configuration mismatches. Viewing and Acknowledging Alarms

Set the multiplier to prevent excessive charging speeds. 📊 Alarm Management and Relay Mapping

Individual rectifier failures, high battery temperature, or mains AC failure.

For network monitoring, the Smartpack2 Touch supports SNMP (v1, v2c, v3). To activate the SNMP option after installation:

The is not just a safety pamphlet; it is a tuning guide. This charger is powerful enough to rejuvenate a sulfated truck battery yet delicate enough to maintain a sensitive lithium house bank. However, it defaults to conservative settings. Only by reading the manual can you adjust the charge current for a small generator or disable the night dimming mode for a dark engine room. smartpack2 touch user manual

Current output voltage delivered to the load.

Before operating, familiarize yourself with the physical components:

Green (OK), Yellow (Warning), and Red (Alarm).

Located on the front bezel for direct firmware updates, configuration uploads, and log downloads using a standard flash drive. For network monitoring, the Smartpack2 Touch supports SNMP

Regular maintenance ensures the long-term reliability and security of your control system. Backing Up Configuration Data Insert a formatted USB flash drive into the front USB port. Navigate to > Maintenance > File Management .

The is a powerful master controller used for monitoring and controlling Eltek's DC power supply systems . It features a local touch-screen user interface and serves as the central hub for a distributed control system, typically used in conjunction with "Basic" and "I/O" controllers . Core Documentation Resources

A list of currently triggered faults sorted by severity and timestamp.

Select whether the relay should be or Normally Closed (NC) . 🔧 Maintenance, Backup, and Firmware Updates However, it defaults to conservative settings

If you need to revert changes, you can use the backup files you saved. Through the browser interface, use the Backup/Restore function to upload a previously saved HEX or XML file. This will overwrite the current settings with the saved configuration.

The defining feature of this controller is its high-resolution color touch screen, which replaces complex physical keypad matrices with a modern, user-friendly graphical interface.

Measures the total amperage consumed by connected equipment.