Motomaster Battery Charger 111568 Manual Jun 2026

Have the battery load-tested at an automotive service center. A damaged battery with internal shorts will convert charging energy into heat instead of voltage. Battery Blinks "Fault" or "Bad Battery"

Indicates the battery is fully charged and the unit has entered float mode.

: Do not expose the internal charger housing to rain, snow, or damp environments.

: He found a solid piece of the engine frame for the ground, just as the manual suggested for safety. The Connection : He plugged the unit into the wall outlet. motomaster battery charger 111568 manual

The charger requires a minimum base voltage from the battery to wake up. If the battery is completely dead (below 2V), the smart charger may not recognize it is connected. The Red "Fault" Light Is Flashing

Provide these details, and I can give you custom step-by-step diagnostic advice! Share public link

: Indicates a fault condition. The charger has detected an issue and stopped delivering power. Maintenance and Storage Proper care extends the lifespan of your battery charger: Have the battery load-tested at an automotive service center

12V Lead-Acid, AGM, and Gel batteries.

Store the unit in a clean, dry, indoor environment with the cables loosely coiled to prevent internal wire breakage.

The battery voltage is too low (less than 10V) after 10 minutes of charging. The battery may be defective or have a load connected. : Do not expose the internal charger housing

Getting stranded with a dead battery is one of the most frustrating experiences a driver can face, but having a reliable charger like the MotoMaster Eliminator

Connect the clamp to a heavy, unpainted metal part of the vehicle chassis or engine block away from the battery. Step 3: Select Your Settings