Iwata 2crh Bundy Clock Manual |verified| [RECENT – 2027]

Keep the card slot covered when not in use to prevent dust accumulation on the optical sensors.

Re-verify your settings under Programming Code 04. Manually override using the top buttons if necessary. Failed internal CMOS backup battery.

Navigate to for the Year or Code 01 for the Month and Date. Use the + or - buttons to adjust the values. Press Enter to save the value and proceed. 2. Setting the Time (Hour and Minute)

Navigate to the card format setting (usually labeled as code 03 or C1 on the digital display). Select your card style: for Monthly cards (1-31) 02 for Weekly cards 03 for Bi-weekly cards iwata 2crh bundy clock manual

Enter or Code 04 (depending on your specific software version) to adjust the clock.

Press the button to ensure the print head moves to a workable position, then unplug the machine for safety. Locate the ribbon cassette in the center of the mechanism.

: Locate the mechanical toggle switch labeled Run / Prgm (or a sliding switch near the main board) and push it to the right ( Prgm position ). The digital LCD display will prompt a blinking parameter code starting at 00 or b000 . Keep the card slot covered when not in

Set the using the same buttons and press Enter again. 3. Adjusting the Print Position

| Symptom | Likely Cause | Solution | |---------|--------------|----------| | Clock does not move | Dead mains, blown fuse, jammed gears | Check power, replace fuse (slow-blow), oil movement | | Prints faint / no print | Worn ribbon, dirty print wheels | Replace ribbon, clean type with isopropyl alcohol | | Always prints red | Color-change cam stuck, spring broken | Open movement, check cam follower near 12 o’clock wheel | | Prints wrong date | Manual date knob turned, or date wheel jam | Advance date to correct by turning only | | Card jams | Bent card guide, foreign object in slot | Remove debris, gently realign guide with pliers | | Does not print when card inserted | Micro-switch disconnected, solenoid dead | Check switch continuity, listen for solenoid click |

Insert the key into the top cover lock and turn it to unlock. Failed internal CMOS backup battery

The Iwata 2CRH Bundy clock is a reliable mechanical time recorder used by businesses to track employee attendance accurately. This comprehensive manual covers everything you need to know to set up, operate, maintenance, and troubleshoot your Iwata 2CRH time recorder. Technical Specifications Iwata 2CRH Display: Analogue clock face with digital date indicator Print Color: Dual color (Red and Black) Power Source: 110V - 240V AC, 50/60Hz Backup Battery: Built-in lithium battery for data retention Card Feed: Automatic feed and eject Initial Hardware Setup

The is famous for running 30+ years without service, but it does require lubrication.

Insert the time card into the slot. The machine will automatically feed the card.