Movelo Algonquin 26 Manual __link__

Carefully remove the bike from the box, ensuring all components (frame, front wheel, handlebars, seat, pedals) are present.

Pedals are side-specific. Installing them on the wrong side will permanently strip the threads on your aluminum crank arms.

Adjust the angle of the handlebars by loosening the faceplate binder bolts, rotating the bars to a comfortable position, and retightening the bolts evenly. Step 3: Saddle and Seatpost Setup

If one brake pad sits closer to the wheel than the other, look for the tiny spring tension screws on the sides of the brake arms. to pull that specific arm away from the rim. movelo algonquin 26 manual

The Algonquin typically features front and rear V-brakes (rim brakes).

: Apply light oil to all pivoting points of the front and rear derailleurs at least monthly. Chain Care : Use bicycle-specific chain lube (like Finish Line

The manual recommends: , then sides.

Ensure the wheel is seated properly in the dropouts. Adjust the tension screws on the sides of the brake arms.

Squeeze both levers to ensure they stop the bike before hitting the handlebars.

Regular maintenance keeps your bike safe and extends its lifespan. Carefully remove the bike from the box, ensuring

Keeping your Movelo Algonquin clean and lubricated will extend its lifespan significantly. Check tire pressure; test front and rear brakes. Monthly

Insert the seatpost into the seat tube, making sure the is hidden inside the frame.

Threads into the right chainring side clockwise. Adjust the angle of the handlebars by loosening

Thread into the drive-side (chain side) crank arm. Turn clockwise (toward the front of the bike). Tighten firmly with a 15mm wrench.