Motorola Cm140 Programming Software !exclusive!

As of the last decade, the most compatible version for the CM140 is through R06.12.09 . Newer versions may require subscription licenses from Motorola.

Under the tab, check "Run this program in compatibility mode for" and select Windows 7 . Check "Run this program as an administrator."

If you are used to modern software with sleek "Material Design" interfaces, the CM140 CPS will feel like stepping into a time machine. motorola cm140 programming software

Connect the programming cable to the radio's front mic port. Turn on the radio.

: The software often requires lower-range COM ports (typically 1–16). If the cable is assigned a high port number (e.g., COM40) in Device Manager, it may fail to connect. As of the last decade, the most compatible

Enter your desired and Tx Frequency (ensure they match your licensed frequencies). Configure the Squelch Type :

The CM140 radios were a popular choice for public safety agencies due to their reliability and durability. However, programming them required specialized software and a good understanding of radio configuration. Check "Run this program as an administrator

Connect the programming cable to the USB port of your computer. Connect the RJ45 end to the . Turn on the radio. 3. Reading the Radio (Crucial Step) Open the CPS application.

: Modify your channels, setting the Frequency and Privacy Codes (CTCSS/DCS) to match your fleet.

Because this is legacy software, it runs natively on Windows XP, Windows 7, and Windows 8. If you are using Windows 10 or Windows 11, you may need to run the installer and the application in Compatibility Mode (set to Windows 7) and as an Administrator. Required Hardware