Before downloading the tool, ensure you have the following items: Windows XP, 7, 8, 10, or 11.
Ensure other software (like terminal emulators) isn't locking the port. Reverify assigned COM address indicators inside the Windows Device Manager utility. Corrupted or incorrect firmware payload selection.
Based on the available information, we recommend: ali-rs232-upgrade-tool-v1-2-0 downloader
Connect the other end to your PC's COM port or USB-to-Serial converter. Step 3: Run the Upgrade Tool Open the Ali-RS232-Upgrade-Tool-V1-2-0.exe application.
If you are using a USB-to-Serial adapter, you install the correct drivers for it on your Windows computer. Your computer will not recognize the adapter without the proper driver installed. The manufacturer of your adapter should provide these drivers, or you can find generic Prolific or FTDI drivers, depending on the chip used in your adapter. Before downloading the tool, ensure you have the
: If the tool cannot find the device, ensure the correct COM port number is selected in Windows Device Manager.
Click the button inside the software window. The program will shift into a listening state, waiting for a hardware signal handshake. Turn on the master power switch of the satellite receiver. Corrupted or incorrect firmware payload selection
Whenever possible, use the tool's "Dump" feature instead of "Upgrade" to extract and back up your receiver's existing working firmware before overwriting it.
Depending on the tool version, select the upgrade type. For a full recovery, "allcode + bootloader" is often recommended. Initiation: (or Next) button. The loader will display a message like "Sending upgrade request to box..."